Axis W102 Guide D'installation page 27

The 3.0 V MS621T and 3.7 V ID1058 batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl ether
(EGDME), CAS no. 110-71-4.
The 3.7 V ID1058 battery contains 1,3 Propanesultone,
CAS no. 1120–71–4.
DANGER
• Do not dispose of the product or batteries in a fire or a
hot oven. Risk of explosion.
• Do not leave the product or batteries in any
high-temperature environment over 80°C (176°F).
• Do not leave the product or batteries in extremely low
or high-temperature surroundings, which can result in
leakage of flammable liquid or gas.
• Do not subject the product or batteries to low air
pressure that may result in an explosion or leakage of
flammable liquid or gas.
WARNING
• Always charge the product using an Axis body worn
docking station or a 5.0 V USB-C power supply that
meets the UL/IEC LPS or PS2 requirements. Never
attempt to charge the product by any other means.
• The 3.0 V MS621T battery is not designed to be
replaced. Please contact Axis support or your Axis
reseller for service matters.
• If needed the 3.7 V ID1058 rechargeable lithium
battery can be replaced using the AXIS TW1906
Battery Kit 5P.
• Never expose batteries to excessive heat such as
sunshine, fire or similar.
27