Publicité
Les langues disponibles
Les langues disponibles
rip int
Other
The LCD may be off or not
be in correct video mode.
The system connection may
be not correct.
The unit may be not in AV
out mode.
The disc may be dirty or
warped.
Turn on the LCD and choose
the correct video mode.
Connect
the
system
correctly.
Switch AV tab on the bottom
of the unit to out.
Clean or change the disc.
Static or other external interference may cause the player function abnormally. In order to
recover normal status, unplug the power-supply cord and then plug it into the outlet again to
reset the player. If the problems still exist, cut off the power supply and consult your service
center or the qualified technician.
30
D
" "Dolby" and the double-D symbol are trademarks of Dolby L
Confidential unpublishe
<—70dB (1kHz)
Audio Signal-to-noise Rate
Audio distortion+noise
Channel Separation
>70dB (1kHz)
>80dB (1kHz)
.
Output Level: 1.5V415, Load: 10KQ
Dynamic Range
Analog Audio
Out
Video Out
Video Out
Output
Level:1Vp.p+0.2, Load: 750
Unbalanced Negative
pee
|
Dimensions
|
230mmX154mmX40mm (L*W4D)
Weight
|
About 0.85kg
Audio Out
ESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
_ Manufactured under license from Dolby Laboratories. -
works. © 1992 -1 997 Dolby Laboratories, Inc. E
A I
rights reserved.
Le
vn
2005.11
31
Publicité
