Publicité
CAUTION: IN
ORDER TO AVOID
A HAZARD DUE
TO INADVERTENT
RESETTING OF THE
THERMAL CUTOUT,
THIS APPLIANCE
MUST NOT BE
SUPPLIED THROUGH
AN EXTERNAL
SWITCHING DEVICE,
SUCH AS A TIMER,
OR CONNECTED
TO A CIRCUIT THAT
IS REGULARLY
SWITCHED ON AND
OFF BY THE UTILITY.
CAUTION: SOME
PARTS OF THIS
PRODUCT CAN
BECOME VERY HOT
AND CAUSE BURNS.
PARTICULAR
ATTENTION HAS TO
BE GIVEN WHERE
CHILDREN AND
VULNERABLE
PEOPLE ARE
PRESENT.
5059340980867_MNL_IN_V04.indd 8
5059340980867_MNL_IN_V04.indd 8
• If the supply cord is damaged,
it must be replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
• Do not install the appliance
on carpet, rugs or a similar
covering.
• Keep all objects at least 1m
from the front, sides and rear
of the appliance
Electric connection
The appliance is to be supplied
through a residual current device
(RCD) having a rated residual
operating current not exceeding
30 mA.
CAUTION: DO
NOT BEND, CRUSH
OR PINCH THE
ELECTRIC SUPPLY
CORD BEHIND
THE APPLIANCE.
LEAVE ENOUGH
SPACE BEHIND THE
APPLIANCE SO THAT
IT IS NOT IN DIRECT
CONTACT WITH THE
FIXED ELECTRIC
WIRING SYSTEM.
• The appliance must not be
connected via an extension
cable or a power strip.
8
30/04/2024 9:14:41 pm
30/04/2024 9:14:41 pm
Publicité
