Publicité
Les langues disponibles
Les langues disponibles
3. Slide the shoe backward so the shoe plate keyways
engage the two lock posts on the tool.
4. Tighten clamping screw and clamp plate with its
beveled side towards the tool.
Fig. C
11
9
10
Fig. D
5
OPERATION
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury.
Proper Hand Position (Fig. E)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the main
handle
6
.
11
Fig. E
Switching On and Off (Fig. F)
•
To switch the tool on, depress the variable speed switch
1
. The tool speed depends on how far you depress
the switch.
•
For continuous operation, press the lock-on button
and release the variable speed switch. This option is
available only at full speed.
•
To switch the tool off, release the variable speed switch.
To switch the tool off when in continuous operation,
press the variable speed switch once more and
release it.
11
CAUTION: Check that the tool is not locked on before
connecting it to a power supply. If the trigger switch
is locked on when the tool is connected to the power
supply, it will start immediately. Damage to your tool
or personal injury may result.
Fig. F
Cutting Action
Orbital or Straight (Fig. G)
This jig saw is equipped with four cutting actions, three
orbital and one straight. Orbital action has a more
aggressive blade motion and is designed for cutting in soft
materials like wood or plastic. Orbital action provides a faster
cut, but with a less smooth cut across the material. In orbital
1
English
6
2
2
5
Publicité
