Publicité
Les langues disponibles
Les langues disponibles
Lamp replacement
Disassembly and assembly the lamp of upper zone
Instructions:
1.Use a screwdriver to remove a tapping screw in the view (1).
2.Pull out the lampshade to the left by hand. See view(2).
3.Use a screwdriver to remove two tapping screws (3) of the fixed LED lamp panel (4), remove
the LED lamp panel and replace it with a new LED lamp panel, and then reinstall the two screw.
4.Insert the newly removed lamp panel to the right into the slot of the lamp box (5) and secure
the screws on the left side.
Disassembly and assembly the lamp of lower zone
Instructions:
1.Use a screwdriver to remove the two tapping screws from the view (1).
2.Remove the entire LED lamp panel (3) and lampshade (2) components directly.
3.The entire lampshade component can be placed on the countertop (with a scratch resistant
pad). Use a screwdriver to remove the two screws (4) that secure the lamp panel, take out the
old lamp panel, replace it with a new one and then fix the two screws (4) that were just removed.
Last, install the entire lampshade component back to the corresponding position of the
lampshade in the partition plate(5).
EN
upper zone
（5）
（4）
（3）
（2）
（1）
-32-
Publicité
