ATTACH CROSSBARS
AND ADJUST HEIGHT
2A
Connect each Crossbar (B) to 2 Downrods (C)
using 2nd holes from ends
PLACE AND ATTACH GRIDS
Sticker
You have now completed the installation are ready to load your new HyLoft Storage Unit.
(Maximum 150 lbs. per 36" x 36" unit, evenly distributed). Place the sticker provided on a
crossbar for easy reference information.
Periodically (at least annually) check all connections to ensure that they remain tightly
fastened.
3A
Lay Wire Grids (A)
evenly on Support Bars and
attach as shown. Note: Long
grid wires are on the bottom
and extend past support bars
equally on both sides.
four-wire clusters
nearest Downrods
Adjust
Downrods
to
Desired
Length
2B
Connect Crossbar and Lower
Downrods to Ceiling Downrods
3B
Fasten together Grids (A)
using 2 Plastic Tie Straps (I).