FRAM Fresh Breeze CF11175 Guide Rapide

CF11175
Installation Bulletin:
Bulletin d'installation :
Boletín de Instalación:
Estimated time of installation:
Temps estimé pour l'installation :
Tiempo estimado de instalación:
Application: Mazda 6
Application:
Aplicación:
For more application specifics,
please refer to our catalog.
Pour obtenir plus d'information
sur les applications, veuillez
consulter notre catalogue.
Para obtener información
específica sobre la aplicación,
consulte nuestro catálogo.
FRAM Group Operations LLC
Danbury, CT 06810-5109 U.S.A.
©2012 FRAM Group IP LLC
FRAM Group (Canada) Inc.
2430 Meadowpine Blvd.
Unit 105 & 107
Mississauga, ON
L5N 6S2 Canada
SOME VEHICLES MAY DIFFER SLIGHTLY. IF YOU HAVE QUESTIONS
REGARDING THIS FILTER, ITS INSTALLATION OR MORE DETAILS
SPECIFIC TO YOUR VEHICLE, PLEASE VISIT
www.framfreshbreeze.com
FOR HOW-TO VIDEOS AND ADDITIONAL INFORMATION.
CERTAINS VÉHICULES PEUVENT PRÉSENTER DES DIFFÉRENCES. SI VOUS
AVEZ DES QUESTIONS CONCERNANT CE FILTRE, SON INSTALLATION OU
DÉSIREZ OBTENIR PLUS DE DÉTAILS CONCERNANT VOTRE VÉHICULE,
VEUILLEZ VISITER LE www.framfreshbreeze.com POUR OBTENIR
DES DÉMONSTRATIONS VIDÉOS ET PLUS D'INFORMATION.
PUEDE VARIAR UN POCO EN ALGUNOS VEHÍCULOS SI TIENE PREGUNTAS
SOBRE EL FILTRO Y LA INSTALACIÓN O DESEA INFORMACIÓN EN DETALLE
PARA SU VEHÍCULO, VISITE www.framfreshbreeze.com, DONDE
ENCONTRARÁ VIDEOS INSTRUCTIVOS E INFORMACIÓN ADICIONAL.
Importado por:
FRAM Group Operations Mexico City S.A. de C.V. FRAM Group Operations Mexico City S.A. de C.V.
Carretera México-Cuautitlán km 31.5 S/N
Nave 5, Conjunto Industrial Cuautitlán.
Col. Loma Bonita
Cuautitlán, Edo. de México
MEX, C.P. 54800
Tel. 01 800 7154 135
Hecho en China
TOOLS: TOOLS: None required. TOOLS:
LOCATION OF CABIN FILTER: Behind the glove box on the passenger side of the vehicle LOCATION OF CABIN FILTER: LOCATION OF CABIN FILTER:
12-2011
REMOVE REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION. REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
10 minutes or less
10 minutes ou moins
1. Open the glove box and disconnect the dampener rod on the right side of the glove box. Disconnect the rod by pulling it towards
10 minutos máx.
the passenger side door.
2. Push in on both sides of the glove box until the glove box disengages from each side and the glove box can swing down on its
bottom hinge.
3. Disengage the glove box completely from the dashboard.
4. Remove the cabin filter door.
5. Remove the dirty filter.
6. Install the clean filter.
7. Reinstall the cabin filter door.
8. Reengage the glove box to the dashboard.
9. Re-attach the dampener rod to the right side of the glove box. (Caution – if the glove box is closed without being joined
to the dampener rod, the dampener rod may be damaged. Verify that the dampener rod is joined to the glove box before
closing the glove box.)
10. Close the glove box.