Wagan Tech 7406 Guide D'utilisation page 8

8A Intelligent Battery Charger by Wagan Tech
4. Place the free end of the battery cable as far away from the battery to
be charged as the cables permit and then connect the black negative (-)
charger clip to the free end of the cable. NEVER face the battery when
making the connection.
5. Plug the AC power cord/plug into a properly grounded outlet.
6. When disconnecting the charger, always use the reverse order from the
connection process, staying as far away as possible from the battery.
OPERATING INSTRUCTIONS
Selecting Charging Rate
This smart charger has an Optimal function. The optimal function automatically
selects the charge rate best fit for your type of battery depending on feedback
pulse the battery gives off. If you do not want to use the optimal function, you can
choose your charging rate manually. This Smart Charger has three charging rrate
options. Press the Charging rate selection button for desired charging rate and
voltage.
• 6V 2A – Can be used for 6V batteries.
• 12V 2A – Can be used for small size automobile batteries.
• 12V 8A – Can be used for medium to large automobile batteries.
• Lithium Iron Phosphate (LiFePO4)
Note: If you want your battery to sustain its life longer, slow charge it. Slow
charge will take longer but will charge your battery more thoroughly. If your
battery needs to charge in a short amount of time, use the Fast charge.
Battery Reconditioning
When your battery has been unused for long periods of time, the battery will be
in a deep discharged state. The battery reconditioning function is to recover the
battery from deep discharge and help the battery last longer.
When the battery is fully charged, the charger will automatically determine if
the battery needs to be reconditioned. If the battery needs to be reconditioned,
7
www.wagan.com
®