Xiaomi Mi Jia Inflatable Treasure 2 Guide De L'utilisateur page 29

Troubleshooting
Problem
Slow inflation speed
Air compressor turns on but
does not inflate
Unable to increase or
decrease the preset
pressure
Air compressor inflates
normally but the
displayed pressure is zero
Air compressor already
turned off after connecting
the air hose to a valve
Air leaks out when
connecting the air hose
Unable to power on
1. Check whether the air compressor's
battery level is sufficient.
2. Check whether the air hose is leaking.
3. Check whether both ends of the air hose
are securely connect ed.
4. Check whether the item that is bei ng
inflated is leaking.
1. Check whether the air hose is remov ed
from its compartment before inflating.
2. Check whether
battery level is sufficient.
3. Check whether the pressure of the item
that is being inflated exceeds the preset
pressure .
Make sure the air compressor is set to the
correct mode . Manual mode has a blank
display without any icons and allows you to
adjust the preset value within a ra nge of 3 -
150 psi.
The pressure of low-pressure inflatables
including balloons is too low to measure.
Press and hold the Start/Stop butto n to turn
the air compressor on again.
Make sure the air hose is securely
connec ted.
1. Check if the air pipe is pulled out, and only
when the air pipe is pulled out can the
machine be turned on.
2. Fully charge and start the machine
27
Solution
the air compressor's