Publicité
Les langues disponibles
Les langues disponibles
The TYCAM Guard camera feature is equipped with a new generation of high resolution
sensors providing a great quality image whatever the lighting conditions.
Connected to your internet hub or router, the camera enables you to view your home on your
smartphone and record videos and photos vial the Tydom application.
Remotely, you can:
- Observe and listen
- Start a recording instantly.
- Take an instant photo.
- Speak with your family and relatives.
- View the recorded videos.
- Receive notifications in case of detection.
Choosing detection settings:
• Detection types:
- Human detection:
The camera only detects
humans.
- Vehicle detection:
The camera only detects
vehicles.
- Movement detection:
The camera detects any movement.
• Intrusion zones:
The camera detects any
movement in one or several
predefined grid zones (maximum
4 zones).
• Line crossing detection:
The camera detects any person
that crosses a predefined
detection line.
The line crossing detection
mode requires a special setup: see §3.
16
Other features:
- Plug & play.
- Remote surveillance.
- Surveillance mode setting.
- Automatic recording on detection.
- Continuous recording with detection.
- Recording management
(back up, delete, etc.).
- Notifications:
- Events.
- Detection alerts.
- Camera disconnection.
- Intercom.
- 4x digital zoom.
- Image reversal.
- Backlight compensation.
- Photo capture.
- Privacy mode.
- Max. 8 cameras.
- Integrated siren.
- Tycam Guard:
- LED projector.
- Infrared night vision,
+ colour night vision possible.
1 - Installation recommendations
For best results:
- Avoid installing the camera in an area with
strong changes in brightness (backlighting)
or one that is too dark.
- Ensure that there is no reflecting surface
too near the camera lens.
- Do not install the camera on an unstable
support that creates vibrations.
- Avoid proximity to a heat source.
- Do not touch the lens with your finger.
- Do not expose the camera to direct sunlight.
- Do not subject the camera to impacts.
- Electromagnetic radiation can affect video
data transmission and image quality. Do
not install the camera near a source of
electromagnetic radiation.
- The installation must conducted using the
best practice of video surveillance.
- Ensure that all the associated devices are
switched off during the installation.
- For equipment connected to the power grid,
the socket outlet must be installed close to
the equipment and readily accessible.
- Recommendations for using the camera with
Wi-Fi: Wi-Fi 2.4 GHz.
Some internet routers broadcast 2 Wi-Fi
networks at the same time: one for
2 - Camera operation
Video recording
- The videos are automatically deleted after
30 days.
- When the storage limit of the card is
reached, the oldest videos are deleted
automatically.
- The recording time can vary according to
the movement in the image. These values
are given for information only and cannot
be guaranteed (see § 4.5).
- The lifetime of the memory card will
depend on the SD card used. Only the SD
card supplied with the camera ensures an
operational life of 2 years.
Videos are recorded in "medium" resolution quality. Each video recorded upon detection
starts 5 seconds before the event for a total duration of 35 seconds
2.4 GHz and the other for 5 GHz.
The camera must be used with 2.4 GHz
Wi-Fi.
Sometimes, you have to rename the 2 Wi-Fi
networks using your router settings. This
depends on your supplier.
Before installation, make sure the Wi-Fi
speed in the camera environment is at least
1 MB/s.
The number of Wi-Fi devices in the home can
reduce the bandwidth available: ensure the
Wi-Fi network isn't overloaded.
Thick walls and/or metal in walls can also
reduce Wi-Fi quality. A wired connection may
be needed.
Maintenance of camera:
- Periodically check the wiring and
connections of your camera.
- Regularly check that there are no insects or
spider webs that could trigger false alarms.
Use a soft, slightly damp cloth to clean the
lens of the outdoor camera.
EN
17
Publicité
