Cleaning And Maintenance - Melchioni Family PRATICA Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Pour more water into the boiler
Caution! When the appliance is working and before the boiler has cooled down,
don't open the boiler cap (4)! To refi ll the boiled please proceed as follows:
Switch the boiler off (1).
-
Pull out the plug and wait at least 5 minutes to let the boiler cool down.
-
Turn the cap (4) slowly 2-3 times anticlockwise, and let the remaining steam come out of
-
the boiler. Then unscrew the cap completely and remove it.
Empty the boiler of the possible remaining water. Pour water inside only when the boiler is
-
empty.
Put a funnel in the fi lling hole and pour water into the boiler.
-
ATTENTION: Don't pour more than 500cc (0,5 l.) of water. Never exceed this quantity!
Remove the funnel.
-
Put the cap (4) back in its place: turn it clockwise till it is completely screwed.
-
Disconnecting the steam ironing system
Caution! The steam ironing system is off and safe only after you follow this instructions:
Disconnect the boiler heating switch (1) and the iron heating switch (2). Pull
out the plug and let the steam ironing system cool down.

CLEANING AND MAINTENANCE

Caution ! Before any maintenance or cleaning, unplug the machine and let the boiler
cool down.
Pour in the boiler some water and rinse out to remove eventual limestone
-
residues. Repeat it also after a long period of inactivity.
Always empty the boiler. The remaining water in the boiler may build up lime deposits.
-
Clean the machine enclosure with a wet cloth.
-
Don't use any solvents, they may damage the machine plastic components.
-
VOLTAGE
BOILER CAPACITY
TOTAL POWER
230V / 50Hz
0,8 LITRI
2000 W

Publicité

Table des Matières
loading

Table des Matières