Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
"ADD WATER"
Lack of Water.
indicator is on.
"ICE FULL"
indicator is
Ice is full in basket.
on.
The ice making cycle is
too long.
Ice cubes
stick together.
Water temperature in
inner tank is too low.
Room temperature or
water temperature in
inner tank is too high.
Ice making
cycle is
Refrigerant in cooling
normal but no
system leaks.
ice formed.
Pipe in the cooling system
is blocked.
SOLUTION
Stop the ice maker, fill water, and press
"ON/OFF" button again to restart the unit.
Remove ice from ice basket. Continuous press
"Select" button 5 seconds, the unit could
make ice 10 cycles even "Ice" indicator is on.
Stop the ice maker, and restart it when the ice
blocks melt. Select the small size ice cube
selection.
Replace the water. Temperature of water
O
recommended at 40 F-90 F
The room temperature should be 50 F-105 F,
water temperature should be 40 F-90 F
Verify by a qualified technician.
Verify by a qualified technician.
20
O
O
O
O
O
Publicité
