Samsung QE55LS01B Manuel De L'utilisateur page 7

03 Initial Setup
When you turn on your TV for the first time, it immediately
starts the Initial Setup. Follow the instructions displayed on the
screen and configure the TV's basic settings to suit your viewing
environment.
• When installing the 32LS03B model as a wall mount, it can be
installed vertically and used.
– Some features may not support portrait mode or full
screen.
– The initial setup is optimised for landscape mode.
Using the TV Controller
You can turn on the TV with the TV Controller button at the top
left of the TV, and then use the Control menu. The Control menu
appears when the TV Controller button is pressed while the TV
is On.
• The screen may dim if the protective film on the top left of the
TV is not detached. Please remove the protective film.
Control menu
TV Controller button / Remote control sensor
• TV mode
– Press: Move
– Press & Hold: Select
• Art mode
– Press: Switch to the TV mode.
• In Art mode, the Remote control sensor at the top left of the
TV remains off.
English - 6
04 Troubleshooting and
Maintenance
Troubleshooting
For more information, refer to "Troubleshooting" or "FAQ" in the
e-Manual.
> Menu > Settings > Support > Open e-Manual >
Troubleshooting or FAQ
If none of the troubleshooting tips apply, please visit "www.
samsung.com" and click Support or contact the Samsung service
centre.
• This TFT LED panel is made up of sub pixels which require
sophisticated technology to produce. There may be, however,
a few bright or dark pixels on the screen. These pixels will
have no impact on the performance of the product.
• To keep your TV in optimum condition, upgrade to the latest
software. Use the Update Now or Auto update functions
on the TV's menu ( > Menu >
Software Update > Update Now or Auto update).
• In Portrait Mode, some apps or external inputs may not
support the full screen.
The TV won't turn on.
• Make sure that the One Connect Box Power Cable is securely
plugged in to the One Connect Box and the wall outlet.
• Make sure that the wall outlet is working and the remote
control sensor at the top left of the TV is lit and glowing a
solid red.
• Try pressing the TV Controller button at the top left of the TV
to make sure that the problem is not with the remote control.
If the TV turns on, refer to "The remote control does not work".
Settings > Support >