CLEANING AND MAINTENANCE
Do not use abrasive cleaning
agents or solvents.
1. Disconnect the mains plug from the mains
socket.
2. Take out the food and store in a cool location.
3. Clean the appliance with a soft cloth, warm
water and detergent.
4. Wipe the door seal with clear water only
and then wipe dry thoroughly.
5. After cleaning reconnect and set the
temperature as desired.
6. Put the food back into the appliance.
The LED lights in the fridge compartment cannot be replaced by the user. If the LED lights stop working,
please contact the local authorised service agent.
TROUBLESHOOTING
If there is a problem with your appliance, please check the following points before contacting customer
service.
Problem
Appliance does
not operate.
Noises
Appliance not
cool
Possible causes
No electricity at power outlet.
Cabinet not stable or level.
Temperature setting not
correct.
Frequent door openings.
Large amount of food recently
added.
Check that the plug is correctly connected and
power switched on.
See installation section.
See Adjusting the Temperatures section.
Minimise door openings to allow temperatures
to stabilise.
(1
Possible solution