Greencut CBD2015L Manuel D'utilisation page 31

TECHNICAL DATA
Model
Input
Output
Compatible Battery Pack
NOTE: GREENCUT reserves the right to modify the specifications of the device
without prior notice.
LED FUNCTIONS
MODE
Charging
Full Charge
PRODUCT USE
CHARGING THE BATTERY PACK
Battery packs are shipped in a low charge condition to prevent possible problems. Therefore, you
should charge them until the green LED on the front of the charger comes on.
CHARGING A HOT BATTERY PACK
When using a tool continuously, the batteries in the battery pack will become hot. You should
let a hot battery pack cool down for approximately 30 minutes before attempting to recharge.
NOTE: Refer to CHARGING A COOL BATTERY PACK for normal recharging of
batteries.
CHARGER
CBD2015L
100-240V AC / 50-60Hz / 45W Max.
21V 1,5A
BTD2020L / BTD2040L
RED
ON
OFF
31
GREEN
OFF
ON
EN