Main Functions; Additional Functions - Air Naturel Air&me Lendou Guide D'utilisation

MAIN FUNCTIONS

[ AUTO ] BUTTON
By pressing this button ( ), the device operates automatically: it adapts the speed of
B
the fan and the rate of the air purification according to the rate of the particles present
in the ambient air.
[ SPEED ] BUTTON
Pressing this button ( ) several times, you gradually increase the fan speed. The device
D
has 4 purification speeds and a turbo mode:
• [ Speed 1 ]: Extra quiet mode
• [ Speed 2 ]
• [ Speed 3 ]
• [ Speed 4 ]
• [ Turbo ]: This is the highest rate of air purification
[ WIFI ] BUTTON
By pressing this button ( ) for 3 seconds, you can connect the device to your wireless
J
network and pair it via the dedicated smartphone app.
Go to www.airandme.fr/connect to install the app and connect your device.
[ NEGATIVE IONIZATION ] BUTTON
By pressing this button ( ), you can turn on and off the negative ionization. Thanks to
J
this function, Lendou emits between 3 and 8 million negative ions per second, which
effectively regenerates the air of a room. The diffused negative ions are subject to an
electrostatic phenomenon: they are attracted by the particles suspended in the air
and are fixed on them, then dropped to the ground. So, the air is purified.
[ FILTER ] BUTTON
Press and hold this button after replacing the filter, to reset the filter wear measurement
system.
[ LIGHT ] BUTTON
The [ Light ] button allows you to adjust the brightness of the LED bar according to the
time of day and your preferences:
• [ 100% ]: The LED bar is on, and the lights are at 100% of their capacity.
• [ 50% ]: The LED bar is on, and the lights are moderate, at 50% of their capacity.
• [ Night Mode ]: The LED bar is off. Combined with [ Speed 1 ], this option is ideal if you
put the air purifier in a room.
16

ADDITIONAL FUNCTIONS

CHILD SAFETY LOCK
By pressing the [ Speed ] ( ) button for 5 seconds, you will hear a beep: the child safety lock
D
that locks the control panel is activated. To deactivate it, press the [ Speed ] (
for 5 seconds.
OPTIFILTER : INTELLIGENT WITNESS OF FILTER WEAR
TM
The Lendou air purifier has a patented filter wear measurement technology called OptiFilter
To calculate the life of the filter, the device takes into consideration 3 factors:
• The number of operating hours of the device,
• Air quality during the use of the device,
• The fan speed during the use of the device.
This way, depending on how you use the device and your direct environment, you will need to
replace the filter every 6 to 12 months.
COLORED AIR QUALITY VISUALIZATION
When the unit is operating, the color of the LED bar changes according to the ambient air
quality.
• The LED bar is green when the air quality is good (displayed "TOP" on the application).
• The LED bar is orange when the air quality is average (displayed "OK" on the application).
• The LED bar is red when the air quality is bad (displayed "POOR" on the application).
CHANGING THE FEET OF THE DEVICE
If you want to change the feet of the device:
1. Be sure to unplug the unit before returning it gently.
2. Follow the instructions on the bottom of the unit.
3. Turn the unit over and plug it.
Warning: The feet must be pulled vertically and must not be turned/screwed. Attach 4 feet of
identical heights to the unit, so that it does not become unbalanced.
) button again
D
.
TM
17