The air purifier Lendou has a Wi-Fi function and a built-in air-quality sensor.
The air purifier settings can be changed at any time manually, either by
using the buttons on the control panel, or remotely, via the dedicated
smartphone app.
COMPONENTS (SEE PAGE 2)
Tray
1
Front side of the device
2
4 feet "down"
3
Back of the device
4
Air quality sensor
5
Fan
6
Power cord
7
Rear grille (air inlet)
8
CONTROL PANEL (SEE PAGE 3)
ON/OFF button
A
[ Auto ] button
B
Indicator light [ Auto ]
C
[ Speed ] button
D
Indicator light [ Speed 1 ]
E
Indicator light [ Speed 2 ]
F
Indicator light [ Speed 3 ]
G
Indicator light [ Speed 4 ]
H
OPERATION PRINCIPLE
The air purifier Lendou will allow you to breathe clean air in your home and thus protect your
health through three levels of filtration:
Level 1: Pre-filter:
Dusts, hair, animal hair
Level 2 : HEPA + activated carbon filter:
Volatile Organic Compounds (VOCs): pollens, mites, allergens from animals, molds, bacteria;
fine particles (PM 2.5); bad smells
14
HEPA + active carbon filter
9
Pre-filter
10
4 feet "high"
11
Control panel
12
LED indicator of air quality
13
Tray insertion holes
14
Air outlet
15
Indicator light [ Turbo ]
I
[ Wifi ] and [ Negative Ionization ] button
J
Indicator light [ Wifi ]
K
Indicator light [ Negative ionization ]
L
[ Filter ] button
M
Filter replacement indicator
N
[ Light ] button
O
GOOD AIR AT HOME!
Here are some complementary and simple tips to help you improve the air quality of
your home:
Don't smoke inside.
Ventilate the room at least 15
minutes a day, even in the winter.
Remember to maintain your
ventilation system and to dust off
the air vents.
Ventilate the rooms where
you have work done or where
you tinker.
USE PRECAUTIONS
• Make sure that the product is placed on a dry flat surface.
• Leave at least 50cm behind, around and in front of the appliance.
• Make sure you have removed the plastic packaging from the filter.
• Make sure the filter and the rear grille are correctly positioned and pressed. This unit has a
device that turns off automatically if the filter and rear grille are not well placed.
OPERATING INSTRUCTIONS
1. Connect the device.
2. Press the ON/OFF button (
) to turn on the device.
A
3. Press the ON/OFF button again to turn off the device. The unit keeps the last settings in
memory. So, if you set your device to [ Speed 4 ] and [ Light = 50% ] before turning it off, when
you turn it on later, it will automatically be set to [ Speed 4 ] and [ Light = 50% ].
Limit the use of household
products, which are rich in
volatile organic compounds
and formaldehyde.
Avoid using scented candles,
incense sticks, deodorant sprays,
home fragrances.
15