Cleaning And Disinfecting Instruction; Troubleshooting - Shenzhen Creative Industry Co. Oxy-One Plus Mode D'emploi

ask the manufacturer for helping to download the
given R-curve into the SpO
High-pressure sterilization cannot be used on the
device.
Do not immerse the device in liquid.
It is recommended that the device should be kept
in a dry environment. Humidity may reduce the
life of the device, or even damage it.

6.2 Cleaning and Disinfecting Instruction


Surface-clean sensor with a soft cloth damped
with a solution such as 75% isopropyl alcohol, if
low-level disinfection is required, use a mild bleach
solution.

Then surface-clean with a cloth damped ONLY
with clean water and dry with a clean, soft cloth.
Do not sterilize by irradiation steam, or
Caution:
ethylene oxide.
Do not use the Oximeter if it is damaged.

7 Troubleshooting

Problem:
1. The SpO
2
2. Cannot turn on the device
and Pulse Rate display instable
simulator.
2
16