Publicité
ENGLISH
Overview
A - Gaming headset
B - Tuck-away boom microphone
C - USB-C charge port
D - Bluetooth multifunction button
Charging
It is recommended that the earbuds and charging case be fully charged before
rst use. The headset will take approximately 2.5 hours to fully charge from low
battery.
STATUS LED
Breathing Blue
Solid Blue
Bluetooth Setup and Usage
Bluetooth multifunction button
Power button
Bluetooth pairing
1. With the headset turned ON, press and hold the Bluetooth multifunction
button for 2 seconds. The LED indicator will ash blue.
2. On your Bluetooth-enabled device, search and connect to HyperX Cloud Mini.
Once connected, the indicator LED will ash blue every 5 seconds.
Button Controls
Bluetooth Multifunction Button
STATUS
1 PRESS
Playing Media
Play/Pause
Receiving Call
Answer Call
In Call
X
Power Button
STATUS
1 PRESS
Powered-O
X
Powered-On
Toggle sidetone
In Call
Toggle sidetone
E - Status LED
F - Power button
G - 3.5mm headset jack
H - USB charge cable
CHARGE STATUS
Charging
Fully Charged
2 PRESSES
LONG PRESS
X
Pairing Mode
Reject Call
X
End Call
X
LONG PRESS
Power-On
Power-O
Power-O
Connecting with 3.5mm Cable
*Requires 4-pole 3.5mm audio cable
Using with PC, Chromebook, or Notebook
*Requires 3.5mm headset jack with standard CTIA connection
*PC splitter cable (not included)
*4-pole 3.5mm audio cable
Using with Mobile Devices
*Requires 3.5mm headset jack with standard CTIA connection or compatible
3.5mm adapter.
*4-pole 3.5mm audio cable
Using with Xbox or PlayStation or Nintendo Switch
*4-pole 3.5mm audio cable
Tuck-Away Boom Microphone
Questions or Setup Issues
Contact the HyperX support team at hyperx.com/support
WARNING: Permanent hearing damage can occur if a headset is used at high
volumes for extended periods of time.
Publicité
