Operation; Filling; Using The Dispenser; Adjusting The Temperature - Polar Refrigeration CF760 Mode D'emploi

UK
Tank
Front
Lever
Slot
Fig. 3

Operation

Note: CF761 Only - If only one tank is to be filled it must be the tank on the side of the
temperature control knob.

Filling

Switch Off the dispenser.
1.
Remove the lid and pour the liquid into the tank.
2.
Replace the lid.
3.
WARNING: Do not fill the tank with hot liquid.
Do not let the level exceed the 'MA' level line displayed on the front of the tank.

Using the Dispenser

Turn On the Power switch on the side of the dispenser.
1.
Switch the stirring switch to the 'On' position [I].
2.
Once the liquid is sufficiently cooled, push the receptacle against the tap
3.
lever to dispense the liquid.
Note: Should the paddle encounter any resistance in the liquid, it will reverse direction.

Adjusting the Temperature

Adjust the temperature setting of the dispenser with the Temperature
Control Knob fitted to the side of the Dispenser.
The temperature varies from level 1 (12°C) to 7 (6°C).
3
Fig. 4
Fig. 5
Fig. 6
Cooling
Column