Schneider Airsystems KLG 90-40 SYS Notice D'utilisation D'origine page 7

Table of contents - Part 1
1.1 General information..................
1.2 Scope of delivery .....................
1.3 Conventional use .....................
1.4 Technical data..........................
1.5 Components ............................
1.6 Commissioning ........................
1.7 EC Declaration of Conformity .....
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the
instruction manual!
Subject to technical modifications. Illustra-
tions may deviate from the original.
1.4 Technical data
Air consumption
Max. permissible pressure
Working pressure (flow pressure)
Compatible staplers (length)
Staple type
Wire thickness
Staple back width, type 90
Pulse sound pressure level L
as per DIN 45 635, part 66
Pulse sound power level L
as per DIN 45 635, part 66
Vibration (under load) as per DIN EN 28 662,Part1
Contact trigger
Insertion depth adjustment
Overall dimensions: width x depth x height
Recommended hose diameter (inner) at L= 10 m
Weight
1.5 Components
01 Plug nipple
02 Trigger lever
03 Catch lever
04 Magazine
3
3
3
3
3
4
4
(at distance of 1 m)
pa 1m
wa
1.2 Scope of delivery
– Stapler
– Staples
– Allen wrench
– Tool oil
– Safety glasses
– Systainer
– Instruction manual
1.3 Conventional use
The compressed air tool is an industrial tool
suitable for:
Securing tongue and groove boards, profiled
boards, panels,
boards, boxes, substructures.
Any other type of use is considered contrary
to the intended use.
255 x 67 x 232 mm
05 Magazine slide
06 Trigger safety device
08 Depth setting
11 Exhaust air guide
KLG 90-40 SYS
fences, furniture
0.8 l/impact
8 bar
5 - 8 bar
13 - 40 mm
90
1.25 x 1.0 mm
5.70 mm
84 dB(A)
97 dB(A)
2
1.98 m/s
Yes
Yes
9 mm
1.1 kg
GB
back
I/ 3