Manufacturer's Warranty; Spare Parts Lists - Roller Elektro-Freeze 2 F-Zero Notice D'utilisation

eng
5.4. Fault: Deep freeze times in table (Fig. 3) substantially exceeded.
Cause:
● Water temperature too high
● Pumps not switched off. Water fl ow available.
● Solar radiation at the freeze point.
● Paint, rust on tube to be frozen.
● Fan of apparatus blowing at the freeze point.
● Hose connection on the deep-freezer head facing downwards
● Anti-freeze in liquid to be frozen.
● Apparatus defective.
6. Disposal
The ROLLER'S Elektro-Freeze 2 F-Zero electric pipe freezer and the coolant
R--290 may not be thrown into the domestic waste after use. They must be
disposed of according to the legal regulations.

7. Manufacturer's Warranty

The warranty period shall be 12 months from delivery of the new product to the
fi rst user. The date of delivery shall be documented by the submission of the
original purchase documents, which must include the date of purchase and the
designation of the product. All functional defects occurring within the warranty
period, which are clearly the consequence of defects in production or materials,
will be remedied free of charge. The remedy of defects shall not extend or
renew the warranty period for the product. Damage attributable to natural wear
and tear, incorrect treatment or misuse, failure to observe the operational
instructions, unsuitable operating materials, excessive demand, use for unau-
thorized purposes, interventions by the customer or a third party or other
reasons, for which ROLLER is not responsible, shall be excluded from the
warranty
Services under the warranty may only be provided by customer service stations
authorized for this purpose by ROLLER. Complaints will only be accepted if
the product is returned to a customer service station authorized by ROLLER
without prior interference and in a fully assembled condition. Replaced products
and parts shall become the property of ROLLER.
Remedy:
● Let water cool down
● Switch off pump. Shut off water.
● Mount sun protection in front of the freeze point
● Remove paint, rust from freeze point.
● Move ROLLER'S Elektro-Freeze 2 F-Zero so that hot exhaust air does not
blow onto the freeze point.
● Fit the deep-freezer head to the tube with the hose connection facing upwards
if possible (Fig. 2)
● Check l-quid, liquid can possibly not be froze.
● Have the apparatus checked/repaired by an authorised ROLLER customer
service workshop.
The user shall be responsible for the cost of shipping and returning the product.
A list of the ROLLER-authorized customer service stations is available on the
Internet under www.albert-roller.de. For countries which are not listed, the
product must be sent to the SERVICE-CENTER, Neue Rommelshauser Strasse
4, 71332 Waiblingen, Deutschland. The legal rights of the user, in particular
the right to make claims against the seller in case of defects as well as claims
due to wilful violation of obligations and claims under the product liability law
are not restricted by this warranty.
This warranty is subject to German law with the exclusion of the confl ict of laws
rules of German International Private Law as well as with the exclusion of the
United Nations Convention on Contracts for the International Sales of Goods
(CISG). Warrantor of this world-wide valid manufacturer's warranty is Albert
Roller GmbH & Co KG, Neue Rommelshauser Straße 4, 71332 Waiblingen,
Deutschland.

8. Spare parts lists

For spare parts lists, see www.albert-roller.de → Downloads → Parts lists.
eng
9