AS Torantriebe Alpheo 24V Instructions page 29

Stagnoli Istruzioni Instruction Instructions Betriebsanleitung
Calibrating the microswitches (Alpheo 230V) with the geared motor installed on the
right
Closing:
With the geared motor released, close the gate to point wanted; turn the bottom cam
clockwise until the bottom microswitch trips and then lock it with the relative screw.
Opening:
With the geared motor released, open the gate to position wanted and turn the top cam
counter clockwise until the top microswitch trips and then lock it with the relative screw.
30