ProBreeze PB-F12 Mode D'emploi page 7

OPERATING INSTRUCTIONS
― ―
Before First Use:
Air duct angle adjustments:
1. Before adjusting the angle of the air
duct, ensure the appliance is turned off
and unplugged.
2. Hold the appliance by the main
body and tilt the air duct forwards or
backwards by a 15-degree angle.
The Led Display:
1. Filter Replacement Indicator Light
2. Temperature Display
3. AUTO Mode
4. Settings and Humidity Display
5. Power Button
1
5
•
Power Button: Press once to turn the
appliance on. Hold down for one second
to turn the oscillation of the fan on and
off. Press repeatedly to adjust the wind
speed. Hold down for two seconds to
turn off the appliance.
•
Filter Replacement Indicator Light:
After 720 collective hours of operation,
the Filter Replacement Indicator Light
will indicate the filter needs to be
replaced. Replace the filter following the
instructions in the 'Replacing the Filter'
section of this manual and then hold
down the power button on the remote
for 5 seconds. The Filter Replacement
Indicator Light will turn off and the filter
lifetime will be reset.
•
Temperature Display: This displays the
current temperature.
•
Auto Mode: If the appliance is in Auto
Mode, this indicator will read 'AUTO'.
2
•
Settings and Humidity Display: This
indicator will display the current wind
3
speed setting when changing between
4
wind speed settings 1 – 9. Wind speed
will be set when there have not been
any changes for 5 seconds. The display
will then show the humidity level of the
environment.
English | 6