Télécharger Imprimer la page

Venga VG AS 3003 Mode D'emploi page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
IMPORTANT INFORMATION
This appliance is not intended for professional use. You should follow the requested
breaks. Failure to follow this instruction carefully may result in damage to the motor.
The breaks should last at least 10 minutes.
This slicer is equipped with a safety switch. To turn on the appliance, push and hold the
switch to the right and push the ON / OFF button simultaneously. The blade will begin to
turn. To stop it, set the switch (7) to the OFF position.
USING THE SLICER
For a safe use, your appliance is fitted with a complete device (carriage (5) with a thumb
guard (6) and pusher) which allows protecting your hands by giving an exceptional use
comfort.
The platform allows making to and from motions along the blade to cut the slices. Use the
handle to move it.
The pusher allows you to keep the food when slicing by holding your hand far from the
blade. Therefore it is recommended to always use it except if the food is too large and in
this case keep it as far as possible from the blade.
Clean all parts of the appliance before the first use.
Make sure the appliance is steady and add the pusher on the carriage (5).
Plug in the appliance. The slicer is now ready for use.
Place a plate or a dish behind the blade to collect the slices.
Free the carriage from the blade and lay the food to be sliced on its stainless steel
plate.
Push the food against the mobile side of the appliance with the pusher and select
the slicing thickness by turning the adjustment lever (8).
Place the switch (7) to the position ON. The blade will start rotating. To stop, place
the switch (7) in position OFF.
Push the carriage to bring the food to the blade (2). Therefore use the handle of the
carriage and keep the pressure on the mobile side of the appliance thanks to the
pusher.
If it becomes difficult to slice the food (important braking of the blade), move back
a little bit and start the operation again by approaching the blade slowly.
To avoid food sticking to the appliance and to improve the slicing, you can moisten
or oil the blade with a wet towel beforehand.
Do not slice meat with bones, food with large seeds, rolled roast without removing
the string, wrappers (i.e. aluminium foil), frozen food or any hard, inedible food parts.
VG AS 3003
6

Publicité

loading