Publicité
Les langues disponibles
Les langues disponibles
ERRORS
Error codes
Problem
Code E1 is showing in the
display
Code E3 is showing in the
display
Code E4 is showing in the
display
Code E6 is showing in the
display
Code E7 is showing in the
display
Technical data sheet
GB 24
Potential causes
Water intake time is too long.
Warm-up time too long, required temperature
not reached
Should the appliance become overfilled or exhibit excessive leaking,
shut off the inlet tap and alert the service department.
Standard place settings
Height
Width
Depth
Noise level
Rated voltage / frequency
Power consumption
Power consumption of off-mode
Power consumption of
standby-mode
Water pressure
Energy efficiency class
Annual energy consumption
Program duration of the standard
cleaning cycle
Annual water consumption
Drying efficiency class
Standard cleaning cycle
Program duration of the standard
cleaning cycle
Net weight
Solution
Inlet tap not opened.
Faulty temperature sensor or heating
element. Note the code and alert the service
department.
Note the code and alert the service
department.
Note the code and alert the service
department.
Note the code and alert the service
department.
12 (TFI8018) / 9 (TFI8048)
820 mm
595 mm (TFI8018) / 445 (TFI8048)
540 mm
45 (TFI8018) 49 (TFI8048) dB (A) re 1 pW
220-240 V, 50 Hz
1930 W
0 W
1,4 W
0,4-10 bar) - 0,04-1 MPa
A+
291 (TFI8018) / 222 (TFI8048) kWh
1,02 (TFI8018) / 0,77 (TFI8048) kWh
3360 (TFI8018) / 2940 (TFI8048) liter
A
Normal 50 ºC
165 (TFI8018) / 160 (TFI8048) min.
48 (TFI8018) / 37 (TFI8048) kg
Publicité
