Publicité
Liens rapides
sauder.com
Twin Headboard
Shoal Creek Collection | Model 412091
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
How else are you
gonna know which
end is up?
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-20
Français pg 21-23
Español pg 24-26
Lot # 386915
12/16/15
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987
Publicité
Manuels Connexes pour Sauder 412091
Sommaire des Matières pour Sauder 412091
- Page 1 Shoal Creek Collection | Model 412091 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Prefer the phone? Call 1-800-523-3987.
- Page 2 Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 6-20 Hammer Not actual size Français 21-23 Español 24-26 Electric dril with 1/4" bit (Use only in indicated step) Warranty Page 2 412091 www.sauder.com/services...
- Page 3 Use this part identifi cation to help identify similar parts. RIGHT END (1) TOP (1) BACK (1) LEFT END (1) PANEL (1) FLIP-UP DOOR (1) RIGHT UPRIGHT (1) SHELF (1) ADJUSTABLE SHELF (2) LEFT UPRIGHT (1) SMALL SHELF (1) www.sauder.com/services 412091 Page 3...
- Page 4 NUT - 4 ANGLE BRACKET - 3 WASHER - 4 DOOR STOP - 1 RUBBER SLEEVE - 8 METAL PIN - 12 HINGE - 2 HINGE SPACER - 2 HEADBOARD BRACKET - 2 KNOB - 1 Page 4 412091 www.sauder.com/services...
- Page 5 Screws are shown actual size. You may receive extra hardware with your unit. 117S BLACK 1-1/8" MACHINE SCREW - 1 SILVER 1-1/4" BOLT - 4 SILVER 5/8" FLAT HEAD SCREW - 4 BLACK 9/16" LARGE HEAD SCREW - 14 NAIL - 30 www.sauder.com/services 412091 Page 5...
- Page 6 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. To begin assembly, push a SAUDER TWIST-LOCK® å FASTENER (L) into the large holes in the UPRIGHTS (C and D).
- Page 7 Then, insert the metal end of a CAM DOWEL (N2) into each HIDDEN CAM. Do not tighten the HIDDEN CAMS in this step. Arrow (14 used) Arrow Arrow Insert the metal end of the CAM DOWEL into the HIDDEN CAM. www.sauder.com/services 412091 Page 7...
- Page 8 Tighten Risk of damage or Arrow injury. HIDDEN CAMS must be completely Arrow Maximum tightened. HIDDEN 210 degrees CAMS that are not completely tightened may loosen, and parts may separate. To Minimum completely tighten: 190 degrees Page 8 412091 www.sauder.com/services...
- Page 9 Step 4 Insert four METAL PINS (T) into the SMALL SHELF (H). å Insert the METAL PINS (T) in one end of the SMALL å SHELF (H) into the holes in the LEFT UPRIGHT (D). Finished edge www.sauder.com/services 412091 Page 9...
- Page 10 RIGHT UPRIGHT (C). Minimum With a hammer, tap the DOOR STOP (R) into the small 190 degrees å hole in the SHELF (G) as shown in the lower diagram. Angled edge Page 10 412091 www.sauder.com/services...
- Page 11 Step 6 Fasten two HINGE SPACERS (U) and two HINGES (V) å to the FLIP-UP DOOR (J). Use four SILVER 5/8" FLAT HEAD SCREWS (AA). SILVER 5/8" FLAT HEAD SCREW (4 used in this step) www.sauder.com/services 412091 Page 11...
- Page 12 Then tighten the mounting screw. hardware kits available Fasten the FLIP-UP DOOR (J) to the SMALL SHELF (H). on sauder.com. å Use the screws in the HINGE. See step 9 for adjustments. NOTE: The top edge of the DOOR (J) and the top surface å...
- Page 13 Step 8 Fasten the SHELF (G) to the UPRIGHTS (C and D). å ® How to use the SAUDER TWIST-LOCK FASTENER Tighten four TWIST-LOCK® FASTENERS. 1. Insert the dowel end of the FASTENER into the hole of the adjoining part.
- Page 14 To adjust the DOOR in or out (depth), loosen the mounting Horizontal å screw one turn and move the DOOR in or out, as needed. adjustment Mounting screw Tighten the mounting screw after making adjustments. (depth) Page 14 412091 www.sauder.com/services...
- Page 15 Now might be a good time to refresh NOTE: Be sure the edges of the ANGLE BRACKETS are å your drink. even with the edge of the PANEL. BLACK 9/16" LARGE HEAD SCREW (3 used in this step) www.sauder.com/services 412091 Page 15...
- Page 16 9/16" LARGE HEAD SCREWS (BB) through the ANGLE 190 degrees BRACKETS and into the SHELF. BLACK 9/16" LARGE HEAD SCREW (3 used in this step) S u r f a c H I D D E N i t h Page 16 412091 www.sauder.com/services...
- Page 17 Fasten the RIGHT END (A) to the TOP (E), PANEL (F), and å SHELF (G). Tighten six HIDDEN CAMS. Maximum Arrow 210 degrees Minimum 190 degrees i t h o f a c S u r D E N H I D Angled edge www.sauder.com/services 412091 Page 17...
- Page 18 UPRIGHTS (C and D) and SMALL SHELF (H). NOTE: Perforations have been provided for access NAIL å (30 used in this step) through the BACK. Carefully cut out the holes needed. These holes must line up over the UPRIGHTS and SHELF. Page 18 412091 www.sauder.com/services...
- Page 19 Mates Bed, use the lower four holes to fasten the HEADBOARD 25 lbs. BRACKETS to the ENDS. total BLACK 9/16" LARGE HEAD SCREW (8 used for the HEADBOARD BRACKETS) 117S SILVER 1-1/4" BOLT WASHER (4 of each used in this step) www.sauder.com/services 412091 Page 19...
- Page 20 This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry. å And to celebrate, why not share your success story? t e s B e d # 4 1 2 0 9 117S SILVER 1-1/4" BOLT WASHER (4 of each used in this step) Page 20 412091 www.sauder.com/services...
- Page 21 Modèle 412091 Tête de lit, lit de 1 place Utilisez les instructions d’ a ssemblage en français avec les NOUS SOMMES LA POUR VOUS AIDER! schémas étape par étape du manuel d’instruction en anglais. Nous faisons de notre mieux pour nous assurer que votre meuble Chaque étape en français correspond à...
- Page 22 éviter d'endommager l'élément ou le sol. ÉTAPE 7 Pour commencer l'assemblage, enfoncer une FIXATION TWIST-LOCK® SAUDER (L) dans les gros trous Avant de fi xer la PORTE à l’unité, s’ a ssurer que la vis de montage des MONTANTS (C et D).
- Page 23 32 mm ARGENTÉS (117S), RONDELLES (Q) et ÉCROUS (P). Aller à l’étape 15 du livret d’instruction du Lit Mates pour terminer le montage de cette unité. Ceci complète l'assemblage. Nettoyer à l’ a ide d’une encaustique pour meubles ou d’un chiff on humide. Essuyer. www.sauder.com/services 412091 Page 23...
- Page 24 Modelo 412091 Cabecera de cama sencilla Use estas instrucciones de ensamblaje en español junto con las ESTAMOS AQUI PARA AYUDAR! fi guras paso-a-paso provistas en el folleto inglés. Cada paso Tratamos de asegurar que su mueble llega en condición excelente.
- Page 25 Para comenzar el ensamblaje, empuje un SUJETADOR TWIST-LOCK® PASO 7 SAUDER (L) dentro de los agujeros grandes de los PARALES (C y D). Antes de ajustar la PUERTA en su unidad, asegúrese de que el PASO 2 tornillo de montaje esté...
- Page 26 Vaya al paso 15 del manual de instrucciones de la Cama Nido para completar el montaje de esa unidad. Esto completa el ensamblaje. Limpie con su pulimento para muebles preferido o un paño húmedo. Seque con un paño. Page 26 412091 www.sauder.com/services...
- Page 27 à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
- Page 28 Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.