Office Star Products EC9230-EC3 Instructions De Montage

FAUTEUIL DE DIRECTION ECO EN CUIR
ÉTAPE 1 ÉTAPE 2
4
3
1
5
6
2
ÉTAPE 4
8L
7
8R
11
11
3
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués
sur la liste et vérifier les quantités des pièces.
ÉTAPE 1 Insérer les cinq Roulettes (2) dans la Base (1). Pousser fermement jusqu'à ce que les Roulettes (2) s'encliquettent. Insérer le Vérin
pneumatique (3) dans la Base (1). Glisser le Soufflet (4) sur le Vérin pneumatique (3).
ÉTAPE 2 Attachez la Plaque du siège (5) au coussin de siège (6) avec la flèche vers l'avant de la chaise, en utilisant quatre Vis (9), RESSERRER
COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 3 Fixer le Support du dossier (12) à l'arrière du Coussin du siège (6) avec quatre Vis du support du dossier (10). RESSERRER
COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 4 Placer le siège assemblé sur le Vérin pneumatique (3) et mettre de la pression vers le bas. Alignez les trous de Bras (8L & 8R) avec les
trous du Coussin de siège (6) et le Coussin du dossier (7), fixez les Bras (8L & 8R) avec deux Vis des bras (9) pour chaque Bras (8), RESSERRER
COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (13).COMPLÈTEMENT TOUTES LES VIS AVEC LA
CLÉ ALLEN (13).
ATTENTION : AVANT D'UTILISER LE FAUTEUIL, VOUS ASSURER D'AVOIR RESSERRÉ COMPLÈTEMENT
TOUTES LES VIS.
EC9230-EC3
ASSEMBLY INSTRUCTIONS
ÉTAPE 3
9
10
12
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . . . . 1
4. Soufflet . . . . . . . . . . . . . . . . . . . . . 1
5. Plaque du siège . . . . . . . . . . . . . . . 1
6
6. Coussin du siège . . . . . . . . . . . . . . 1
7. Coussin du dossier . . . . . . . . . . . . 1
8. Accoudoirs (8L et 8R) . . . . . . . . . . 2
9. Vis de plaque de siège . . . . . . . . . 4
10. Vis du support du dossier . . . . . . 4
11. Vis des bras . . . . . . . . . . . . . . . . . 4
12. Support du dossier (préinstallé) . . 1
13. Clé Allen (non montré) . . . . . . . . . 1
6
7
1
QTÉ
LIMITED WARRANTy
Office Star chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 5 Years on all non-moving metal parts .
• 2 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters .
• 1 Year on upholstery fabric and foam against wear and deterioration .
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in
normal use .
To make a warranty claim, contact Parts Department . Provide model number, proof of purchase, description of the problem and
obtain return authorization . At it's option Office Star Products will:
(a) Supply compatible components of current manufacture .
(b) Repair the customer's component . The customer must prepay freight on any components returned to the factory . Return
freight on components still in warranty will be paid by Office Star Products .
*All warranties are limited to the original purchaser for normal Residential usage by persons weighing 200 lbs. or less. This warranty will not cover labor,
freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star
Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The
user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
Our quality standards are among the highest in the industry . Sometimes, no matter how hard we try, there are times when parts
are damaged or missing . Our Parts Department will do everything possible to promptly remedy the problem . Contact us via e-mail
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a .m . - 5:00
p .m . Pacific Time .
© Office Star Products Mai 2011
EC9230-EC3
EXECUTIVE ECO LEATHER CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1).
To lower seat height sit on chair and lift lever (1).
NOTE: It is normal for chair to slightly lower under
body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with
an adjustment that will allow the user to change the tension
of the tilting feature. Turn knob (2) clockwise to increase
tension and counter-clockwise to decrease or ease the
tension. To lock return chair to the upright position and push
lever (1) in. To unlock pull lever (1) out.
NOTE: Be careful not to loosen the back tilt adjustment knob
completely.
WARNING
1 . Use this product only one person at a time .
2
2 . Do not use this chair unless all bolts screws and
knobs are securely tightened .
3 . Check that all bolts screws and knobs are tight every
three months or as needed .
4 . Do not overturn back tilt knob when decreasing
tension .
5 . Dispose of packing material properly . Do not use
plastic cover as head covering . It may cause
suffocation .
6 . Do not use chair as a stepladder .
7 . Use this chair for its intended purpose only .
8 . Use mild detergent only for cleaning .