Office Star Products ECH83501 Mode D'emploi

FAUTEUIL DE DIRECTION EN CUIR
7R
12
8
11
12 8
9
8
12 9
8
11
12
3
1
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous
assurer que les quantités des pièces sont correctes.
ÉTAPE 1 Insérer cinq roulettes (2) dans la base (1), les pousser très fort jusqu'à ce que vous entendiez ou sentiez la roulette (2) s'enclencher.
Insérer le vérin pneumatique avec soufflet (3) dans la base (1).
ÉTAPE 2 Fixer la plaque du siège (4) au coussin du siège (5) avec la flèche vers l'avant du siège avec six quatre rondelles plates (8) et quatre
vis moyennes (10). RESSERRER COMPLÈTEMENT TOUTES LES VIS MOYENNES (10).
ÉTAPE 3 Placer le siège assemblé sur le vérin pneumatique avec soufflet (3) et mettre de la pression.
ÉTAPE 4 Aligner les trous des accoudoirs (7L et 7R) sur les trous du coussin du siège (5) et du coussin du dossier (6), fixer les accoudoirs
(7L et 7R) avec quatre rondelles plates (8), deux vis courtes (9) et deux vis longues (11) pour chaque accoudoir (7). RESSERRER
COMPLÈTEMENT TOUTES LES VIS. Dissimuler les trous dans les accoudoirs (7) avec quatre couvre-vis en plastique (12) pour
chaque accoudoir (7).
ATTENTION : AVANT D'UTILISER LE FAUTEUIL, VOUS ASSURER D'AVOIR RESSERRÉ
COMPLÈTEMENT TOUTES LES VIS.
ECH83501 / ECH83507
INSTRUCTIONS DE MONTAGE
6
7L
5
4
8
10
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique avec soufflet . . 1
4. Plaque du siège . . . . . . . . . . . . . . . 1
5. Coussin du siège . . . . . . . . . . . . . . 1
6. Coussin du dossier . . . . . . . . . . . . 1
7. Accoudoirs (7R et 7L) . . . . . . . . . . 2
8. Rondelles plates . . . . . . . . . . . . . 12
9. Vis courte . . . . . . . . . . . . . . . . . . . . 4
10. Vis moyennes . . . . . . . . . . . . . . . 4
11. Vis longues . . . . . . . . . . . . . . . . . 4
12. Couvre-vis en plastique . . . . . . . . 8
13. Clé Allen (non montré) . . . . . . . . . 1
2
© Office Star Products Décembre 2010
1
QTÉ
LIMITED WARRANTy
Office Star chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 5 Years on all non-moving metal parts.
• 2 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 1 Year on upholstery fabric and foam against wear and deterioration.
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in normal
use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal Residential usage by persons weighing 200 lbs. or less. This warranty will not cover labor,
freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star
Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The
user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
ECH83501 / ECH83507
EXECUTIVE LEATHER CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift
lever (1). To lower seat height sit on chair and lift
lever (1).
NOTE: It is normal for chair to slightly lower under
body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped
with an adjustment that will allow the user to change
the tension of the tilting feature. Turn knob (2)
clockwise to increase tension and counter-clockwise
to decrease or ease the tension. To lock return
chair to the upright position and push lever (1) in. To
unlock pull
lever (1) out.
NOTE: Be careful not to loosen back tilt adjustment knob
completely.
WARNING
2
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing
tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.