Toro 147-8824 Instructions D'installation page 3

Jack Mount Kit
Titan
Model No. 147-8824
Safety
Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger. Replace any decal that is
damaged or missing.
127-6663
1. Warning—read the
Operator's Manual.
© 2023—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® Riding Mower
decal127-6663
2. Crushing hazard—engage
the parking brake, shut off
the engine, and remove
the key; support the
machine using jackstands.
Register at www.Toro.com.
Installation
Determine the left and right sides of the machine from
the normal operating position.
Preparing the Machine
Gas Models Only
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the
P position.
ARK
4. Shut off the machine and remove the key.
5. Wait for all moving parts to stop.
Electric Models Only
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the
position.
NEUTRAL
4. Engage the parking brake.
5. Shut off the machine and remove the key.
6. Wait for all moving parts to stop.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Form No. 3465-980 Rev A
Installation Instructions
*3465-980*