Costway ES10290 Mode D'emploi page 4

Safety and operation
Check the machine carefully before each use. If the equipment is
damaged, repair or replace it before use.
Place the device on stable ground or securely fix the fan to the
ground before operation. Avoid using it in standing water, wet or
dusty areas, or areas with smoke or other vapors.
Ensure the power supply is safe (with GFCI protection) and stable
before operation. Keep the blower powered on during use.
This blower is intended for inflating objects only. Using it for other
purposes could result in injury or unsafe conditions.
Secure the gas tube around the vent using appropriate tools.
Tighten the exhaust port to ensure the inflation tube is properly
and safely connected to the inflatable object.
Plug the blower into the grounded GFCI protective socket and
switch to the on position.
Keep children away from blower while plugged in and/or
operating. A responsible person should supervise the use of the
product at all times.
Electrical safety
Ensure the power supply surpasses the requirements for safe
operation of the fan.
Extension Cord: Use the shortest length possible.
Ensure that any extension cords are suitable for outdoor use and
have the appropriate gauge and length.
Avoid twisting cables or exposing them to oil, grease, moisture,
chemicals, hot surfaces, sharp edges, and worn objects. Wires
that are frayed or damaged should be replaced immediately.
Unplug the power cord before any cleaning or maintenance
activities.
06
This blower requires back pressure to function correctly.
Operating it without connecting to an inflatable air mold product
may lead to irreparable motor damage.
Maintenance
1. Before use, inspect wires and plugs for any damage or
discoloration. Never operate a blower with a damaged plug to
prevent electric shock or fire hazards.
2. Ensure all fasteners are tight and secure before each use.
3. Regularly clean the machine's safety screen before use.
4. Be alert for any unusual sounds and immediately turn off the
device if you hear anything abnormal.
5. Maintain a clean device, ensuring it's free from any obstructions
or obstacles.
6. Use vacuum products to remove cotton, cloth, and other debris
from the motor, inlet, or fan blades.
7. Avoid using pressure washers, water pipes, or any other water
sources for cleaning the machine. Ensure the equipment is
completely dry before use.
8. The blower is equipped with sealed bearings and requires no
lubrication.
Refueling is not necessary.
9. Prevent the blower from being dropped or falling from heights.
07