Aerfast MEC-AIR AC33024 Mode D'emploi page 2

GB
1- DENOMINATION OF THE COMPONENTS
12
18
4
AC33024
2- TECHNICAL DATA
Power voltage / Frequency
Rated power
Max. operation pressure
Assured noise pressure level (Dir. 2000/14/CE)
Motor shaft rotation speed
Tank volume
Yield (sucked / delivered)
Ambient air temperature / humidity
Overall weight
Dimensions (bxlxh)
3- CE MARKING AND PLATE OF ASSURED SOUND
PRESSURE LEVEL
CE Marking (FIG. 2 - Ref. 1) certifies the compliance of the machine with the essential safety and health requirements foreseen by the Machinery Directive 2006/42/CE. This plate (FIG. 2 - Ref.
2) certifies the compliance of the machine with the essential safety and health requirements foreseen by the Directive 2000/14/CE. They are represented by an adhesive plate in polyester with
black stamp by thermal transfer and they are stuck on the engine panel.
4- THE IMPORTANCE OF THE HANDBOOK
BEFORE USING THIS MACHINE, THE AUTHORIZED OPERATORS (SEE PAR. 2.2.1) MUST READ AND UNDERSTAND THIS MANUAL IN ALL ITS PARTS.
This manual of "Use and Maintenance Instructions" was drawn up according to the provisions foreseen by the "Machinery Directive" 2006/42/EC in order to assure an easy and correct compre-
hension of the contents handled by the authorized operators charged with the use and with the maintenance of this machine. Should the above mentioned operators detect any incomprehen-
sion while reading, please apply immediately to the manufacturer for correct explanations and further information in order to avoid wrong personal interpreting that could endanger safety. This
manual must at any time be available for the authorized operators. Therefore, it must always be placed, well guarded and preserved, near to the machine.
THIS MANUAL IS INTEGRAL PART OF THE MACHINE AND MUST BE PRESERVED FOR FUTURE REFERENCE UNTIL DISPOSAL OF THE SAME. THIS MANUAL MUST ALWAYS BE AVAIL-
ABLE FOR THE CHARGED OPERATORS AND HAS TO BE PLACED WELL STORED AND PRESERVED NEAR TO THE MACHINE.
THE MANUFACTURER CANNOT BE MADE LIABLE FOR DAMAGES TO PERSONS, ANIMALS AND THINGS, DUE TO THE INOBSERVANCE OF THE STANDARDS AND OF THE INSTRUC-
TIONS DESCRIBED IN THIS MANUAL.
THIS MANUAL HAS COMPULSORILY TO BE DELIVERED TOGETHER WITH THE MACHINE, IN CASE THIS LATTER IS TRANSFERRED TO ANOTHER USER.
THIS MANUAL MEETS THE STATE OF ART WHEN THE MACHINE IS TRADED AND CANNOT BE CONSIDERED IMPROPER JUST BECAUSE FOLLOWING TO NEW EXPERIENCES IT CAN
THEN BE UPDATED.
IN CASE OF LOSS OR WEAR OF THE MANUAL, REQUEST A NEW COPY FROM THE MANUFACTURER OR AUTHORIZED DEALER SPECIFYING THE MODEL OF THE MACHINE AND THE
REVISION QUOTED ON THE COVER.
11
19
13
10
8
7
14
6
15
3
1
AC33024
V / Hz
kW
bar
dB
rpm
litres
l/min
°C / % 5 - 40 / 5 - 95
kg
mm 477x548x793
AC33024
1) Check valve
2) Air suction filter
3) Wheels
4) Safety valve (calibrated on 10,5 bar)
5) Condensate drain valve
6) Tank pressure gauge
17
7) Pressure gauge at output
2
8) Pressure switch
9) Air tank
10) ON (I) - OFF (0) switch
9 11) Electric motor
12) Restorable thermal switch
13) Pressure regulator at output
5
14) Fast air outlet tap
15) Pumping assembly/tank connection tubes
16
16) Bearing foot
17) Fixed protection grating of the cooling fan
18) Bi-cylindrical pumping assembly
19) Handle
230 / 50
2,27
10
95
1400
24
330 / 190
36
2