MSI G52-M7108X1 Mode D'emploi page 12

Fan Power Connectors: CPUFAN1/PWRFAN1/SYSFAN1
The 4-pin CPUFAN1 (processor fan) and 3-pin PWRFAN1
(power supply fan) / SYSFAN1 (system fan) support
system cooling fan with +12V. CPUFAN1 can support
three or four pin head connector.
When connecting the wire to the connectors, always take note that the red wire is the positive
and should be connected to the +12V, the black wire is Ground and should be connected to GND.
If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially
designed fan with speed sensor to take advantage of the CPU fan control.
MSI Reminds You...
Always consult the vendors for the proper CPU cooling fan.
Front Panel Connectors: JFP1/JFP2
The mainboard provides two front panel connectors for
electrical connection to the front panel switches and
LEDs. JFP1 is compliant with Intel
Connectivity Design Guide.
Front Panel Audio Connector: JAUD1
The front panel audio connector allows you to connect to
the front panel audio and is compliant with Intel
Panel I/O Connectivity Design Guide.
MSI Reminds You...
If you do not want to connect to the front audio header, pins 5 & 6, 9 & 10 have
to be jumpered in order to have signal output directed to the rear audio ports.
Otherwise, the Line-Out connector on the back panel will not function.
Front USB Connector: JUSB1/JUSB2
The mainboard provides two standard USB 2.0 pin headers
JUSB1&JUSB2. USB2.0 technology increases data transfer rate
up to a maximum throughput of 480Mbps, which is 40 times fa
than USB 1.1, and is ideal for connecting high-speed USB
interface peripherals such as USB HDD, digital cameras, MP3
players, printers, modems and the like.
MSI Reminds You...
Please note that the pins of VCC & GND must be connected correctly or it may cause some
damage
All manuals and user guides at all-guides.com
®
Front Panel I/O
®
8
Power
Power
Switch
LED
2 10
1 9
HDD Reset
Switch
LED
JFP1
Front
ster
Speaker
8
2
7
1
Power
LED
JFP2