Philips Satinelle Soft HP6409/45 Mode D'emploi page 10

EnglisH
10
Cleaning the attachments
1 Switch off the appliance.
 Remove the adapter from the wall socket (1) and pull the appliance
plug out of the appliance () (Fig. 19).
3 Remove the attachment (efficiency cap or massage attachment)
from the epilating head (Fig. 0).
4 Remove loose hairs with the cleaning brush.
5 Rinse the attachment under the tap while turning it.
6 Dry the attachment before you use or store it.
Cleaning the epilating head
1 Switch off the appliance.
 Remove the adapter from the wall socket (1) and pull the appliance
plug out of the appliance () (Fig. 19).
3 Push the epilating head in the direction of the arrow (1) and
remove it from the appliance () (Fig. 1).
4 Remove loose hairs with the cleaning brush (Fig. 1).
5 Rinse the epilating head under the tap for 5-10 seconds while
turning it (Fig. ).
6 Shake the epilating head firmly and dry it thoroughly with a tea
towel (Fig. 3).
Note: Make sure the epilating head is completely dry before you place it
back onto the appliance.
Cleaning the shaving head
1 Switch off the appliance.
 Remove the adapter from the wall socket (1) and pull the appliance
plug out of the appliance () (Fig. 19).
All manuals and user guides at all-guides.com