Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
Wear limit
38
0.67" (17mm)
CAUTION:
Using this grinder with a carbon brush which is
worn in excess of the wear limit will damage the
motor.
NOTE:
Use HITACHI carbon brush No. 38 indicated in Fig.
6.
Replacing carbon brushes:
Remove the brush caps (Fig. 1) with a slotted
screwdriver. The carbon brushes can then be easily
removed.
WARNING:
Never use any accessories other than those mentioned below.
The use of any accessories other than those mentioned below or attachments not intended for use such as
cup wheel, cut-off wheel or saw blade is dangerous and may cause personal injury or property damage.
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.
STANDARD ACCESSORIES
Wrench (Code No. 937913Z) ................................ 1
Hexagonal bar wrench (Code No. 872422) ......... 1
Side Handle (Code No. 322411) ........................... 1
OPTIONAL ACCESSORIES...sold separately
Depressed center wheel (10pcs. per package)
7" (180 mm) external dia. × 1/4" (6 mm)
thickness × 7/8" (22 mm) hole dia.
(Code No. 701070)
9" (230 mm) external dia. × 1/4" (6 mm)
thickness × 7/8" (22 mm) hole dia.
(Code No. 701090)
NOTE:
Specifications are subject to change without any
obligation on the part of the HITACHI.
14
No. of carbon
brush
0.24" (6mm)
Fig. 6
ACCESSORIES
5.
Service and repairs
All quality power tools will eventually require
servicing or replacement of parts because of wear
from normal use. To assure that only authorized
replacement parts will be used, all service and
repairs must be performed by a HITACHI
AUTHORIZED SERVICE CENTER, ONLY.
6.
Service parts list
CAUTION:
Repair, modification and inspection of Hitachi
Power Tools must be carried out by a Hitachi
Authorized Service Center.
This Parts List will be helpful if presented with the
tool to the Hitachi Authorized
Service Center when requesting repair or other
maintenance. In the operation and maintenance
of power tools, the safety regulations and
standards prescribed in each country must be
observed.
MODIFICATIONS:
Hitachi Power Tools are constantly being improved and
modified to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without prior
notice.
Publicité
Table des Matières
