HOMCOM 370-256V00 Instructions De Montage page 5

3. Attach the Front Wheels & Steering Axle
1. Slide a 12 washer onto the front axle.
2. Slide the wheel into the front axle.
3. Slide a 10 washer onto the front axle.
4. Tighten the lock M10 nut to the end of the front axle using a wrench.
Repeat for the other front wheel.
Turn the go cart on its side.
5.Put the 10 washer on the Steering Axle.(Don't remove the washer from the Steering
Axle)
6.Insert the Steering Axle through the steering Axle Support, make sure the other hook
to the opening hole on the Front Axle.
5