Micropoint qLabs ElectroMeter Mode D'emploi page 94

10.1.2 Deleting Patient Test Results
Press the " " button to enter "delete setting" interface.
8.1
-
Press the "OK" button to confirm or press "
DELETED
NO RECORD
10.1.3 Uploading Patient Test Results
10.2 Fast Deleting the Previous Results
Follow these steps to fast delete the previous results that are stored in the
meter memory.
DELETE
CURRENT
+
OK
If the option to delete the current result
is selected, the "DELETED" symbol will
flash on the display for a short time, the
subsequent results will be displayed.
If the option to delete all results is selected,
the display will show "NO RECORD".
Press the "
results to the qLabs
DELETE
8.1
ALL
-
OK
" button to exit.
" button to upload the selected
Data Manager.
®
24
EN
+