Sunny P8100 Manuel De L'utilisateur page 12

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-
907-8669).
#83 1/2"-LH 1pc
#84 1/2" 1pc
#85 S=13,14,15 1pc
#87 δ3 (151X43.5) 1pc
32
STEP 4:
Note: The Pedals (No. 49L & No. 49R) are
marked "L" and "R" for Left and Right.
WARNING! Read
improper assembly may cause permanent damage
to your bike.
Remove the 2 Left & Right Nylon Nuts (No. 83 &
No. 84) located on the Pedals (No. 49L & No.
49R).
Turn the Tension Control Knob (No. 32)
CLOCKWISE as tightly as you can with your hand.
Align the Left Pedal (No. 49L) with the left side of
Crank (No. 50) at 90°. Turn the pedal bolt on the
Left Pedal (No. 49L) COUNTER-CLOCKWISE as
tightly as you can with your hand. Then, use
Crosshead Spanner (No. 85) to tighten and
secure.
Turn the Left Nylon Nut (No. 83) CLOCKWISE as
tightly as you can with your hand. Use Crosshead
Spanner (No. 85) to hold the pedal bolt on the Left
Pedal (No. 49L) and use Universal Wrench (No.
87) to turn the Left Nylon Nut (No. 83)
CLOCKWISE at the same time, until it is tightened
on to the left side of Crank (No. 50).
Align the Right Pedal (No. 49R) with the right side
of Crank (No. 50) at 90°. Turn the pedal bolt on the
Right Pedal (No. 49R) CLOCKWISE as tightly as
you can with your hand. Then, use Crosshead
Spanner (No. 85) to tighten and secure.
Turn the Right Nylon Nut (No. 84) COUNTER-
CLOCKWISE as tightly as you can with your hand.
Use Crosshead Spanner (No. 85) to hold the
pedal bolt on the Right Pedal (No. 49R) and use
Universal Wrench (No. 87) to turn the Right
Nylon Nut (No. 84) COUNTER-CLOCKWISE at
the same time, until it is tightened on to the right
side of Crank (No. 50).
The assembly is complete!
11
instructions carefully as