Publicité
6. Hang up the bag
HANDLE ADJUSTABLE
The rollator's handles can be
adjusted in height to suit different
users. Simply depress the spring
button and set it to the desired
height. Repeat for the opposite
side and make sure that both
handles are secure and set at
the same height before use.
08
BRAKE OPERATION ADJUSTMENT
1. Pull up on brake handle lever to slow the rollator
2. Push down on the brake handle lever to lock the rear wheels, pull
up on the brake lever handle to release the lock
3. Brakes must be applied in the lock position when the seat is
going to be used.
precheck the lock by pushing forward on the rollator.
Brake adjustment should be carried out as follows:
Turn the adjusting screw anti-clockwise to increase the tension then
lock the adjustment locking nut clockwise whilst holding the adjuster
screw stationary. Brake adjustment reduced to allow light pressure
may be ineffective on the brake position.
When sitting and resting on the rollator, please adjust
Tips:
the height of the handrail to your favorite position so that
you can sit on the chair in a more comfortable posture.
MAINTENANCE
Over a period of time, the brake cables may stretch, and if no further
adjustments can be made, the cables should be replaced. Ask
qualified technician for help when replacing brake cables. The
castors should be checked that they are secure each time before
using the rollator. Also, check the brakes operate correctly and the
handles and hand knobs are secure. Should any part of the rollator
appear loose or insecure discontinue use until it is inspected by an
qualified technician. The following shows the maintenance schedule:
Weekly
Check brake for malfunction
Check all wheels and castors for loose bolts and nuts and knobs
Periodically
Check hand grips for wear
Check frame bolts are secure
Check front and rear axle bolts are secure
Check for wear or crack
09
Publicité
