Kerbl OnLink! 1084 Mode D'emploi page 24

Step1 - Connect OnLink! to the network
For the first time use, please connect your OnLink! and Computer
into the same router by network cables.
Step 2 - Install OnLink! Software
Insert the CD, and click "Auto Run", you'll see:
Then install
"Camera Setup" "Camera Live"
First time to view in the browser, Windows will ask your permission
to install "Active X" component.
Click "Allow" to install.
Step 3 - View on PC via IE Browser
Double click
then appears:
The router will automatically
assign OnLink! an IP adresse.
If not, click "Refresh" till it shows up.
Double click selected OnLink! to access it.
You´ll see:
Click "Enter",
in the verification box:
OnLink!
User Name: admin
Password: admin
Click "OK" to view!
24