Main Features - Kerbl OnLink! 1084 Mode D'emploi

Main Features

Easy Installation
The OnLink! comes with built-in Wireless (IEEE802.11b/g/n) capability and a Web Server, therefore there is no need to
install a driver. The setup CD-ROM includes the Setup software, User Manual and Quick Installation Guide.
OnLink! can accept A/V output from Kerbl AVLink with regular RCA cable and make A/V streaming accessible from Inter-
net. Thanks to P2P (Peer to Peer) technology, user can view OnLink! streaming easily from PC/Smart Phone/Client by
simply input UID/Password, no need to configure router, firewall. OnLink! can connect router automatically via network
cable or WiFi. Once connected, you can see and hear what the AVLink received images and sounds from the stableCam
far away on stable side.
802.11b/g/n Wireless LAN Connection Available
The OnLink! is designed to not only work with your existing wired network but also with standard 802.11b/g/n wireless
devices, allowing the flexibility to operate the product wirelessly. The OnLink! utilizes SSID filtering, powerful 64/128 bit
WEP and new security standard WPA encryption to protect you from illegal intrusion.
3GPP Mobile Surveillance
The OnLink! provides the ability to be viewed through your mobile phone as a live video stream, it supports the telecom-
munications standard of 3GPP streaming format. All 3G enabled mobile devices and most 2G phones that support the
streaming standard of 3GPP are compatible. It means it can be viewed from mobile phone browser.
Simultaneous High-Speed MPEG-4 and Motion JPEG
The OnLink! allows live the MPEG-4 and Motion JPEG streams simultaneously. The OnLink! features H.264/MPEG4 com-
pression which compresses the video to make transmission faster and more efficient. The H.264/MPEG4 and MJPEG
image can be transmitted at 30 frames per second.
Simultaneous HTTP and RTSP streaming
The OnLink! support HTTP and RTSP/RTP/RTCP protocol, and provide multiple HTTP and RTSP streams simultaneously.
Audio Transmission
The OnLink! can feeds audio stream into Internet so client can hear the sounds camera picked up.
Snapshot and Recording
You can capture a still image of the OnLink! passed to you on your PC and save the image as JPG or BMP format file. You
can also record the video and audio stream transmitted by OnLink! on your PC and save as an ASF format file.
Motion Detection Function
The OnLink! can detect changes in the image being monitored. Once a change occurs it will send an email to up to 3
email addresses with a video file or snapshot attached. The video file or snapshot can also be uploaded to an FTP server.
In addition the camera can be configured to send images at regular intervals.
OSD Function
OSD (On Screen Display) function can display system name, date and time, and user-defined on screen.
Authentication
An authentication window requires you to enter the user ID and password. Password security can prevent unregistered
users from accessing your camera. Users can select Basic Authentication method or Digest Access Authentication
method.
22