Publicité
Les langues disponibles
Les langues disponibles
MANUEL D'INSTALLATION
BPNONF
Bouton poussoir avec plaque
Thank you for buying our products and for the confidence you placed
in our Group.
1] GENERAL INFORMATION
Ergonomic design with very sensitive switch.
Easy to mount (19MM hole).
Heavy duty.
This high quality pushbutton needs
no dismantling to install the switch.
Available in versions :
- Flush mount with or without a stainless steel plate,
- Precabled or not,
- Surface mount with stainless steel housing (CBP).
Input voltage: 12 V AC/DC - 5 A AC/DC.
Material: cast aluminium body
and stainless steel.
Push button with Silver plated contact switch
certicated UL, CSA & SEMKO.
Soldering contact output :
- BNONF,
- BPNONF (with stainless steel plate).
Precabled output :
- BNONFCAB,
- BPNONFCAB (with stainless steel plate),
NO and NC contact outputs with 2 separate contacts.
The dynamic sealing rubber washer and the rubber washer
mounted at the front totally isolates the electronics.
The dynamic sealing rubber washer and the rubber washer
mounted at the front side isolate totally the electronic.
3] WIRING DIAGRAM
- Normally Open ( NO ) = 3 + 4,
- Normally closed ( NC ) = 1 + 2.
OFF
Switch side view
Ø 22
M 19
2
ON
CE Certification
Environmental tests:
Salt spray
38
19
M 19
28
IP68
-40°C to +85°C
DEEE & RoHS
cdvi.com
cdvigroup.com
EN
25,4
M5
3
Publicité
