VITO PRO POWER VIBCVV20 Mode D'emploi page 29

Question/Problem - Cause
Causa
The motor does not start:
• The battery is not inserted;
• "ON/OFF" switch electrical contacts are not in good
condition or it does not work
• Rotor or stator windings are damaged;
• Short-circuited rotor windings;
Body overheats:
• Overloaded machine;
• Poor assembly of the housing or pieces inside the tile
vibrating suction cup;
;
Solution
• Recharge or replace;
• Repair or replace the switch
• Call technical assistance;
• Call technical assistance;
• Reduce working pressure;
• Check if there is any blockage;
;