Publicité
Les langues disponibles
Les langues disponibles
1. Insert the battery pack (6) into the tile vibrating suction
cup slot and press the battery until you hear the "click"
of the lock/unlock button (5). At this point the battery is
fully secured;
2. To remove, press the lock/unlock button and pull out the
battery.
Use VITO's 20V lithium-ion batteries.
1. Place the battery (6) in the charger as you would place it
in the machine;
2. Plug the charger into the socket and let it charge.
Sometimes at the end of charging, both the battery and the
charger can be hot, but this does not mean that they are
malfunctioning.
Let the battery cool down before fitting into the machine.
The tile vibrating suction cup can be used to help lay and
vibrate the tile in order to spread the adhesive or cement
mortar evenly. It can also be used as a conventional suction
cup without the vibration to help transport the workpiece.
1. To switch on the vibrating suction cup, press the
"ON/OFF" switch (3) continuously;
2. To switch off the vibrating suction cup, release the
"ON/OFF" switch.
The tile vibrating suction cup is equipped with a vibration
speed dial (2) with 6 levels.
Level 0: No vibration.
Level 5: Highest vibration.
1. Press the operating tab (8) until it is aligned with the
lever (7);
2. Place the suction cup on the tile you want to use;
3. Press the lever (7) until you hear the "click" in order to
make suction and lift the tile;
You can release the lever.
4. Position the tile in the desired location, select the
desired vibration speed using the dial (2) and press the
switch (3);
5. To release the tile, press the operating tab until it is
aligned with the lever and remove the suction cup.
Publicité
