Klarstein ST. GALLEN II Manuel D'utilisation page 11

OPERATION
• Insert the adapter into the adapter port and plug it into the electrical outlet.
• Open the front cover, then use your index finger and thumb to hold the watch
holder from the two sides of the holder hitch marked with two arrows. With some
force, pull out the watch holder.
• Place the watch on the holder by pushing in the spring on the back of the holder,
then put your watch around the holder and let go of the spring.
• Once the watch is on the holder, place the holder back into the winder. Push until
you hear a click signifying that it is securely in the winder.
• Press the Rotation touch button to select the winding direction Clockwise,
Counterclockwise or Auto (both directions).
Auto
• Press the TPD touch button to select the desired turns per day (TPD).
Counterclockwise Clockwise
EN
11