Fiilex Q500 Guide De Démarrage Rapide page 6

Rear Panel Interface Operation
KNOB
CCT
PWR
HUE
DMX
HOW TO ASSIGN DMX ADDRESS:
1. Double click the DMX Address Knob (12) to activate the DMX Address Section of the
LCD Display. Once activated, a blinking line will appear below the DMX Display Area.
2. Rotate the DMX Address Knob (12) until desired address appears.
3. Once desired address is selected, click the DMX Address Knob to set the address.
The new selected address will automatically be set after 3 seconds of inactivity.
4. DMX address is selected the Q500 will automatically assign the next two
When a
addresses.The Q500 assigns the addresses in this order:
(1) Intensity
RANGE
2 00K~6500K 8
100%-0.2%
± .25 Magenta / Green
1 ~ 510
(2) CCT (3) Hue
FUNCTION
Set color temperature
Set intensity
Set HUE value
Set DMX address
Flashing underscore
4