HOTO QWLSD007 Manuel D'instructions page 10

Switch the power tool off immediately if the application tool
becomes blocked. Be prepared for high torque reactions which cause
kickback. The application tool becomes blocked when it becomes
jammed in the workpiece or when the power tool becomes overloaded.
Use suitable detectors to determine if there are hidden supply lines
or contact the local utility company for assistance. Contact with
electric cables can cause fire and electrical shock. Damaging gas lines
can lead to explosion. Breaking water pipes causes property damage.
Hold the power tool securely. When tightening and loosening screws
be prepared for temporarily high torque reactions.
In case of damage and improper use of the battery, vapours may
be emitted. The battery can set alight or explode. Ensure the area is
well ventilated and seek medical attention should you experience any
adverse effects. The vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuiting.
The battery can be damaged by pointed objects such as nails or
screwdrivers or by force applied externally. An internal short circuit
may occur, causing the battery to burn, smoke, explode or overheat.
Only use the battery with products from the manufacturer. This is
the only way in which you can protect the battery against dangerous
overload.
Protect the battery against heat, e.g. against continuous intense
sunlight, fire, dirt, water and moisture. There is a risk of explosion
and short-circuiting.
9