BATTERY REMOVAL
NOTE: This process is not reversible. Opening the device will void its warranty. This action must only be undertaken
when the device is ready to be disposed of.
Because this device contains a lithium-ion battery, the battery must be removed before disposal and should not be
thrown away with household waste. To remove the battery, open the inner plastic shell after removing silicone outer
layer and remove the battery to be disposed of in accordance with your local environmental regulations. Wear gloves
during this process for your safety. Detailed visual instructions are provided below.
SPECIFICATIONS
MATERIALS: Body-safe silicone, ABS plastic, copper, glass, gold, zinc alloy
COLOR: Lavender, Pink
SIZE: 82.5*38.8*102mm
WEIGHT: 150g
BATTERY: Li-ion 1000mAh 3.7V
USAGE: Up to 100
STANDBY: 90 days
FREQUENCY: 100 Hz
MAX NOISE LEVEL: <50dB
INTERFACE: 3- button
DISCLAIMER: Users of this device do so at their own risk. Neither FOREO nor its retailers assume any responsibility or
liability for any injuries or damages, physical or otherwise, resulting, directly or indirectly, from the use of this device.
Further, FOREO reserves the right to revise this publication and to make changes from time to time in the contents
thereof without obligation to notify any person of such revision or changes.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RF EXPOSURE STATEMENT: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
8