Publicité
Les langues disponibles
Les langues disponibles
O
PERATION
S
WITCHING ON
The multiple socket is activated and deactivated
by use of the on/off switch 1.
P
ROCEDURE WITH CONTROL LIGHT OFF
Generally the overvoltage protection device
works without affecting the operating connected
devices.
Control lamp 2 only goes off in case of an over-
load caused by a too high overvoltage.
For models with circuit breaker (Belgian model)
press the red button.
If the control lamp 2 lights up, the over-
voltage protection is active again.
There is no overvoltage protection pro-
vided if control lamp 2 does not light up.
The multiple socket can still be used in
such case, however, it is highly recom-
mended to replace it due to the missing
overvoltage protection.
/
OFF
ENGLISH
7
Publicité
