bto 17CL48 Guide Utilisateur page 9

System Startup
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack at the rear of the
computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter.
6. Use one hand to raise the lid/LCD to a comfortable viewing
angle (do not exceed 135 degrees); use the other hand (as
illustrated in Figure 1) to support the base of the computer
(Note: Never lift the computer by the lid/LCD).
7. Press the power button to turn the computer "on".
System Software
Your computer may already come with system software
pre-installed. Where this is not the case, or where you are
re-configuring your computer for a different system, you
will find this manual refers to Microsoft Windows 7.
Model Differences
This notebook series includes two different models (see
Specifications on page 21
All manuals and user guides at all-guides.com
for details).
135
ﾟ
Figure 1
Opening the Lid/LCD/Computer with AC/DC Adapter
Plugged-In

Shut Down
Note that you should
always shut your com-
puter down by choos-
ing Shut Down from
the Start Menu.
This will help prevent
hard disk or system
problems.
3